Sourcing agent or buying direct — what the price gap really is.
Going straight to the factory removes the agent's fee but adds your own costs back in other places. The honest comparison is not fee versus no fee — it is what each route actually costs on your order, including the mistakes.
Short answer: buying direct is genuinely cheaper when you already know the factory, the specification and the market — repeat orders from a qualified supplier, simple products, a buying office nearby. A sourcing agent pays for itself when the category is new to you, the specification is still moving, volumes justify the attention, or a failure would cost more than the fee. The fee itself is rarely the deciding number; what the fee buys — supplier screening, itemised quotations, production follow-up and someone on the ground when something breaks — usually is.
Where buying direct genuinely wins
- Repeat orders from a qualified factory. The relationship, the specification and the quality history already exist. Adding an agent between you and a supplier you trust mostly adds cost.
- Simple, low-risk products. A carton of standard fasteners does not need specification management or an inspection plan worth a percentage of value.
- You have local presence. A buying office in China, or a team that speaks the language and visits in person, is doing the agent's job internally.
- Platforms with built-in protection. Marketplaces that escrow payment, inspect on dispatch and arbitrate disputes partially substitute for the agent's role — for a different fee.
Where the agent earns the fee
- First order in an unfamiliar category. The cost of choosing the wrong factory — deposits at risk, rework, a missed season — dwarfs a 5% fee.
- Specification-driven products. Windows, pods, pumps, furniture: performance depends on details nobody checks by looking at a photograph.
- Custom or made-to-order work. Somebody has to chase drawings, confirm materials, follow production week by week and be present at packing.
- When you cannot verify claims yourself. Test reports, material grades and capacity are easy to claim and expensive to discover late.
The cost comparison, honestly done
Direct does not remove the work — it moves it onto you. A fair comparison counts what each route actually spends on the same first order:
| Cost item | Buying direct | With a sourcing agent |
|---|---|---|
| Supplier finding & screening | Your time; trade-show trips; mis-steps | Included in the fee |
| Quotation comparison | You drive it; language and spec gaps slow it | Itemised, on one basis |
| Sampling rounds | Paid either way (couriers add up) | Paid either way; fewer repeat rounds usually |
| Production follow-up | Remote; mostly emails and hope | On-site, weekly, with photographs |
| Inspection | Third-party booked yourself ($350–500 per man-day; a typical two-day inspection lands at $700–1,000) | Included or at cost |
| Problem response | Time-zone distance; leverage is limited | Local, immediate, relationship-backed |
| Fee | $0 — but your hours are not free | 3–10% or fixed, disclosed or not — see the fee models |
On a $120,000 first order, total cost to you through an agent — fee plus sampling, inspection and consolidation — lands between $6,600 and $9,000 (5.5% to 7.5% of order value), depending on whether the fee is a disclosed percentage or a fixed sum and whether inspection sits inside it. Those are the same assumptions, line for line, as the worked example in the fee guide: USD 120,000 FOB, one factory, one shipment, freight and duty excluded because they are identical on both routes. One avoided mistake — a wrong material grade caught at pre-shipment instead of on site — typically saves more than that. But run the same arithmetic on a fifth repeat order from a factory you trust, and the honest answer flips.
The risk nobody prices in
The direct route's real cost is not the hours; it is information asymmetry. A factory meeting a buyer with no local reference knows what the buyer does not know — what the material grade should cost, which substitute is being offered, what the quoted lead time really means. Some factories respond to that with better prices; some with wider margins. An agent whose income does not depend on which factory wins is, structurally, a way to level that information gap. The fee buys neutrality as much as labour.
The agent route carries its own risk: an agent paid commission on order value has no structural incentive to negotiate the factory down, and an undisclosed factory-side commission breaks independence entirely. The route matters less than the transparency of whoever sits between you and the factory.
A middle path that often works
You do not have to choose once and forever. Common hybrid patterns:
- Direct, with per-task verification. Buy the critical checks only: a factory audit before the deposit, a quotation review before the order, a pre-shipment inspection before the balance.
- Agent for sourcing, direct for repeat orders. Use the agent to find and qualify the factory; go direct once the relationship and quality history exist — often with a residual QA retainer.
- Agent for first order, direct for reorders. The first order carries the discovery cost; reorders reward directness.
Questions worth asking before you decide
Is buying direct always cheaper?
+Only if you already know the factory, the specification and the market. Direct removes the fee but adds your own time, travel, sampling rounds, inspection, and the cost of mistakes. On a first order in an unfamiliar category, those usually exceed the fee.
Do factories give direct buyers better prices?
+There is no reliable universal figure. Some quote the same price either way; some reward direct buyers; others quietly widen margins when the buyer has no local reference. The only defensible method is comparing live quotations for the same specification.
Can I start direct and hire an agent only for inspection?
+Yes — a per-task scope (factory verification, quotation comparison, pre-shipment inspection) buys the critical checks without a full-scope fee. This is the most common hybrid.
What does the agent's fee actually buy?
+Supplier screening, itemised quotations, production follow-up, someone on the ground when something breaks — and, if the fee structure is honest, neutrality: no income from which factory wins. How the fee models compare.
Read next
采购代理还是工厂直采——价差到底是什么。
绕过代理省下的是代理费,但成本会在别的地方回来。诚实的比较不是「有费」对「没费」,而是两条路线在同一张订单上的真实总成本——包括犯错的代价。
一句话结论:当您已经熟悉工厂、规格和市场时——合格供应商的返单、简单产品、在华有采购点——直采确实更便宜。当品类对您是新的、规格还在变动、订单量值得投入、或者一次失败的代价超过代理费时,代理的价值就体现出来。代理费本身很少是决定性的数字;这笔费买到的东西——供应商筛选、逐项报价、生产跟进、出问题时现场有人——才是。
直采确实赢的场景
- 合格工厂的返单。关系、规格、质量记录都已存在,在信任的供应商中间加一层代理,多数时候只是加成本。
- 简单、低风险的产品。一柜标准紧固件,不需要按货值百分比投入的规格管理和检验计划。
- 您有本地存在。在华采购办公室,或者会讲中文、能亲自到现场的团队,等于把代理的工作内部化了。
- 自带保障的平台。托管付款、发货检验、平台仲裁的电商渠道,以另一种费用部分替代了代理的角色。
代理挣得起这笔费的场景
- 不熟悉品类的第一单。选错工厂的代价——定金风险、返工、错过工期——远超 5% 的代理费。
- 规格驱动型产品。门窗、卫浴模块、泵类、家具:性能取决于照片看不出来、必须有人盯的细节。
- 定制或按单生产。总得有人追图纸、确认材质、按周跟进生产、装箱时在现场。
- 您无法亲自核实宣传时。检测报告、材质等级、产能,说起来容易,发现晚了代价很高。
诚实的成本对比
直采并没有省掉工作,只是把工作挪到您身上。对同一张首单,公平的比较是把两条路线各自的真实支出都算进去:
| 成本项 | 工厂直采 | 通过采购代理 |
|---|---|---|
| 找厂与核实 | 您的时间;展会差旅;试错成本 | 包含在代理费内 |
| 报价比较 | 您来推动;语言与规格鸿沟拖慢进度 | 逐项拆分、同一口径 |
| 打样轮次 | 都要付(快递费累积可观) | 都要付;通常返工轮次更少 |
| 生产跟进 | 远程;基本靠邮件与期望 | 现场、每周、带照片 |
| 验货 | 自请第三方(每验货员日 $700–1,000) | 包含或按成本转付 |
| 出问题时的响应 | 时差遥远;筹码有限 | 本地、即时、有关系背书 |
| 代理费 | $0——但您的时间不免费 | 3–10% 或固定费,是否明示另说——费用模式对比 |
以一张 $120,000 的首单计,代理全包成本约 $6,000–8,000。避免一次错误——比如在出货前而不是到工地后才发现材质等级错了——省下的通常就超过这个数。但同样一笔账,算到您信任的工厂的第五张返单上,诚实的答案就会反转。
没人定价的风险
直采的真实成本不是工时,而是信息不对称。面对没有本地参照的买方,工厂清楚您不知道什么——这个材质等级该值多少、提供的是哪种替代料、报的交期背后是什么。有的工厂因此给出更好的价格,有的则悄悄拉大价差。一个收入不取决于哪家中标的代理,结构上就是抹平这个信息差的工具。这笔费买的不只是人力,还有中立性。
代理路线同样有自己的风险:按订单金额抽成的代理,没有推动工厂降价的动力;未申报的工厂端返点则完全破坏独立性。重要的不是选哪条路线,而是站在您和工厂之间的那个人有多透明。
经常可行的中间路线
- 直采 + 按任务购买核实。只买关键环节:付定金前的工厂审查、下单前的报价复核、付尾款前的出货检验。
- 选厂用代理,返单走直采。用代理找到并验证工厂;关系与质量记录建立后转直采,通常保留一个轻量的质检年费。
- 首单用代理,返单走直采。发现成本集中在首单;返单奖励直采。
决定之前值得问的问题
直采一定更便宜吗?
+只有当您已经熟悉工厂、规格和市场时才成立。直采省下代理费,但加上了您的时间、差旅、打样、验货,以及出错的代价。在不熟悉的品类做第一单,这些通常超过代理费。
工厂会给直采客户更好的价格吗?
+没有可靠统一的数字。有的报价不分渠道;有的奖励直采;也有的在判断您没有本地参照时悄悄拉大价差。唯一站得住的方法,是拿同一份规格比较真实报价。
能不能自己直采,只在验货环节请代理?
+可以——按任务计费(工厂审查、报价复核、出货检验)买到的是最关键的检查,而不必支付全范围代理费。这是最常见的混合模式。